Bookstore > Conference Proceedings > IDEA 04
Table of Contents | ||
|---|---|---|
|
Tuesday, September 26, 2006 InsulationAcoustical Natural Fiber Floor Covering for Automotive Interiors Understanding Emissions’ Impacts & Designing a New
Fiberglass Molding Medium for Acoustical Office Panels Passive Fire Protection Systems for Composites Use of Acoustic Impedance and Thermal Measurements to Explore
Fiber Orientation in Insulation Formaldehyde: A Genomic Description of Mode of Action and Its
Relevance to Risk Assessment The Impact of Formaldehyde from Finished Products FiltrationStructural, Thermal and Filtration Properties of Charged
Nonwoven Materials Use of Feather Fiber in Air Filters Nonwovens for Filtration−Standards Modeling of Unsaturated Flow in Anisotropic Nonwoven Materials Computer Models of Nonwoven Geometry and Filtration Simulation Permeability of Highly Dense Nonwoven Fabrics Protective MaterialsMaterials’ Technologies for Next Generation Chemical
Biological Protective Clothing Nanophase Mn(VII) Oxide (NM70) and Nanophase Mn(III) Oxide (NM30)
Incorporated Nonwovens Chemical Warfare Simulant Adsorption by Activated Carbon Nonwovens
for Personal Protection Nanofibers for Defense and Value Added Applications Polymers & FibersThermoplastic Polyurethane and Polyether-block-amide Meltblown
Nonwovens Tailoring the Performance of Specialty Polyolefin Elastomer
Based Elastic Nonwoven Fabrics Properties of Elastic Nonwoven Fabrics’ Bases Upon Specialty
Polyolefin Elastomers Design Analysis of Dies and Extrusion Die Plates Improvement in Bleaching of Kenaf Cellulosic Fibers Using
Penetrating Agents Apparel & Fabric PerformanceComparative Study of Nonwoven Formability Fabric Haptic Device Subjective and Objective Evaluations on Fabric Hand: From Manufacturers
to Consumers Blank Canvas-Elastomeric Nonwovens as Fashion Apparel Protective Materials II: AntimicrobialsIncorporation of Antimicrobial Peptides into Polymeric
Films and Coatings Odor Controlling Apparel Comes of Age: The Values of the Antimicrobial
Approach and More Electrospinning of Polymers into Nanofibrous Protective Layers
with Antimicrobial Properties Embedding Copper Oxide in Medical & Protective Fabrics: Characteristics
and Potential Uses Wednesday, September 27, 2006 Process TechnologyThermal Bonding of Bicomponent Fibers Automated Production of Composites Using Blends & Fleeces
of Natural Fibers New Coating Impregnation Technologies for the Application of
Special Treatments for Nonwoven Products Computational Analysis of the Effect of Contact-angle in the
Through-air Bonding of Fibers Structure and Properties of Hydroentangled Spacer Fabric
Delivery Systems Hand & AppearancesSome Issues in Performance Evaluation of Fibrous Sheets Tactile Behavior of Nonwoven Fiber Assemblies Objective Hand Measurement of Water-absorbing Hygiene
Products Application of PhabrOmeter as a New Objective Fabric Hand Instrument Binders & AdditivesAntibacterial Polymer Technology for Nonwovens Specialty Polymers to Replace Coating Additives Characterization of the Binder Distribution and Rheological
Characteristics as ImperativeFactors in Determining Relative Performance Properties
of the Thermosetting Resins Building & Industrial MatFiber Dispersion in Wet-lay Mixing Tanks Surface Characterization Tools for Fiberglass Antimicrobial Treatment on Wallboard Paper: Where Economy Meets Functionality Monitoring Binder Mix Concentration on Glass Mat by Visible-near Infrared
Spectroscopy and Multivariate Statistical Analysis NanofibersPatterning and Controlling Electrospun Fibers for Tissue Performance Strong Nanofibers and Nanofiber Webs via Spunbond Process Nanofiber Development for Sensor Platforms Electrospun Nonwoven Fabrics for Biohazard Sensing Applications Applications and Production of Nanofiber Nonwoven Media Melt Blown & Spunbond TechnologyFuture of Spunlaid Technology Velocity and Temperature Fields from Multiple-row Melt Blowing Dies Latest Results in Processing PET Spunbonded Nonwovens Influence of Process Temperature on Fiber Diameter Development during Melt
Blowing The Effects of Fiber Size, Charging and Polymer Additives on Filtration
Media Performance Thursday, September 28, 2006 Flame RetardantsCoated Spunbond Nonwovens for General Purpose Shelters Alternatives to Antimony in FR Formulating Flammability Update: Technology & Regulations Inherently Flame Retardant Waterborne Polymers for Textile Applications Flame Retardant Biobased Nonwovens’ Composites Prepared
Entirely from Annual Plants Flammability of Innovative Fabrics for Firefighter Protective Clothing New Non-formaldehyde Flame Retardant Finishing of Cotton/Nomex Blend Fabric
Using a Hydroxyl-functional Organophosphorus Oligomer Product Development of Halogenfree Flame Resistant (HFFR) Nonwovens HydroentanglingThe Effect of Nozzle Geometry, Web and Process Properties on the
Energy Efficiency Predicting Inlet Roundness of Hydroentangling Nozzles Using CFD Simulations The Role of Water Jet Curtain in Modifying Jet Streaks in Hydroentangling
Fabrics Three-dimensional Modeling of the Hydroentanglement Process The Dyeing of Nonwovens: An Examination of the Adsorption Behaviour of
Hydroentangled Fabrics Surface EnhancementsSurface Modification of Fibers & Nonwovens with Melt
Additives Durably Wettable Polypropylene Fibers Novel Additive Delivery System for Natural Fibers Enzymatic Pretreatment as a Method to Enhance the Properties of Nonwoven
Fabrics Enhanced Surface Properties through Altered Surface Interactions Speaker List
|
